Ibis Hakka MX

Starting at

$3,699.99

Hakka MX is the Swiss Army Knife of Ibis. Versatile and hardy and ready to send you on adventures.

  • Build kits include SRAM Rival 1, SRAM Rival AXS and Shimano GRX

  • Wheel upgrades available

  • Colors: Salt Water Taffy, Wizard Potion, Sacre Bleu 

  • "Frame and Fork" only option available

See what Sunshine staff have to say about the Ibis Hakka!>

LIGHTWEIGHT

With its ultra ver­sa­tile geom­e­try and 1000g frame weight, the Hak­ka MX is just as hap­py crush­ing the local club ride as is it is jump­ing bar­ri­ers or camp­ing out.

VERSATILE

It’s good to have options. With the Hak­ka MX, you can run road, cross and grav­el friend­ly 700c wheels, or if you are into burli­er back­coun­try explo­ration, go with 27.5/650b.

With Hak­ka MX, you don’t have to pick one tire option or the oth­er. Sub­tle sculpt­ed chain­stays give the frame clear­ance for up to 700 40c or 27.5 2.1” tires.

CABLE ROUTING OPTIONS GALORE

No mat­ter what dri­ve­train you pre­fer, 1x, elec­tron­ic, or 2x, Hak­ka MX has you cov­ered. The frame has inter­nal cable rout­ing pro­vi­sions for every dri­ve­train on the mar­ket, plus a drop­per post. There's even a slick Di2 bat­tery mount inside the downtube.

BOTTOM BRACKET

Ibis is a big believer in a thread­ed BB. Hak­ka fea­tures the T47 BB stan­dard, which uses 30mm bear­ings enabling you to use the recent crop of light­weight cranksets. This is the best way to com­bine a thread­ed BB with 30mm spin­dle com­pat­i­bil­i­ty. It’s light­weight, qui­et and durable, because no one likes a creaky bike.

DISC BRAKES & FENDER MOUNTS

Hak­ka MX has flat-mount disc mounts and fits a 160mm rotor.

The ENVE G Series Grav­el fork has fend­er eye­lets, inter­nal cable rout­ing and mon­ster clear­ance for 700c x 50c or 27.5″ x 2.25″ tires.

There’s also a remov­able rear fend­er mount on the seat stays.

  




General Specifications

Frame Material Carbon fiber monocoque
Frame Weight 1000g
Wheel Size 700c or 650b/27.5"
Rear Axle 142mm x 12mm thru-axle
Front Axle 100mm x 12mm thru-axle
Seatpost Diameter 31.6mm / Dropper Post Compatible
Front Brake Flat-mount front disc, 160mm rotor (some images show post mount)
Rear Brake Flat-mount rear disc, 160mm rotor
Chainstay Length 430mm
Bottom Bracket T47 Threaded Bottom Bracket
Tapered Headtube IS 41/28.6 upper, IS 52/40 lower
Drivetrain 1X or 2X compatible, Di2 compatible, up to 48t 1X chainring, 34t minimum
Front Derailleur Spec 34.9mm clamp, bottom pull
Colors Bone White/Teal, Coal or Fireball
Sizes 49 / 53 / 55 / 58 / 61
Frame Warranty 7 Years

 

 Accessories shown in images sold separately.